1.0HP Monoblock Pumps
The monoset components are made of selective materials under strict quality control. These are suitable for motors and Pumps.
These pumpsets are available from 0.5 HP to 2.0 HP in single-phase configuration.
Applications :
- Domestic water supply
- general water service
- storage tank filling
- lawn & garden watering
- Water circulating systems
- Industrial water supply
- small farm irrigation etc.
Important Notes
- Use ISI marked quality pipes.
- Proper size of pipes should be installed as specified in nameplate.
- Reduce number of bends and elbows in the pipeline.
- The pump should be run for a few minutes atleast once in 2 days to prevent the pump from seizure due to rust build-up.
- Muddy water will damage the pump. Use strainer at the bottom end of the suction pump.
- Ensure that the pump does not run dry to avoid damage to mechanical seal and impellers.
1.0HP 1X1 M/B
Model : S1025
Body Type : Costing
1.0HP 11/4X1 M/B
Model : S1032
Body Type : Costing
1.0HP 2X2 M/B
Model : S1050
Body Type : Costing
1.0HP 2X2 M/B LONG SHAFT
Model : S1050
Body Type : Costing
1.0HP 3X3 M/B
Model : S1050
Body Type : Costing
1.0HP 3X3 M/B LONG SHAFT
Model : S1050
Body Type : Costing
1.0HP 11/2X11/2 M/B
Model : S1040
Body Type : Costing
APPROXIMATE PERFORMANCE CHART
[wonderplugin_pdf src=”https://skbpumps.com/wp-content/uploads/2021/01/CENTRIFUGAL-MONOBLOC-PUMPS.pdf” width=”1100px” height=”670px” style=”border:0;”]
* marked pumpsets are ISI licenced