0.5HP Monoblock Pumps
The monoset components are made of selective materials under strict quality control. These are suitable for motors and Pumps.
These pumpsets are available from 0.5 HP to 2.0 HP in single-phase configuration.
Applications :
- Domestic water supply
- general water service
- storage tank filling
- lawn & garden watering
- Water circulating systems
- Industrial water supply
- small farm irrigation etc.
Important Notes
- Use ISI marked quality pipes.
- Proper size of pipes should be installed as specified in nameplate.
- Reduce number of bends and elbows in the pipeline.
- The pump should be run for a few minutes atleast once in 2 days to prevent the pump from seizure due to rust build-up.
- Muddy water will damage the pump. Use strainer at the bottom end of the suction pump.
- Ensure that the pump does not run dry to avoid damage to mechanical seal and impellers.
0.5HP LOW HEAD
Model : S0525L
Body Type : Costing
0.5HP LOW HEAD LONG SHAFT
Model : S0525L
Body Type : Costing
0.5HP HIGH HEAD
Model : S0525H
Body Type : Costing
0.5HP HIGH HEAD LONG SHAFT
Model : S0525H
Body Type : Costing
0.5HP 11/2X11/2 M/B
Model : S0540
Body Type : Costing
0.5HP 11/2X11/2 M/B LONG SHAFT
Model : S0540
Body Type : Costing
0.5HP 2X2 M/B
Model : S0550
Body Type : Costing
0.5 HP 2X2 M/B LONG SHAFT
Model : S0550
Body Type : Costing
APPROXIMATE PERFORMANCE CHART
[wonderplugin_pdf src=”https://skbpumps.com/wp-content/uploads/2021/01/CENTRIFUGAL-MONOBLOC-PUMPS.pdf” width=”1100px” height=”670px” style=”border:0;”]
* marked pumpsets are ISI licenced